Images for illustrative purposes only.

The CX271 offers photographers and designers an abundant 3.7 megapixels across its 27-inch screen. It comes with EIZO’s ColorNavigator calibration software and a built-in SelfCorrection sensor that...

Eizo CX271 27"

Minimum rental period:
12 months
6 months
Apply to Purchase:
Any time

While your contract is a rental contract, you can make us an offer to purchase at any time. Some price guides are set out above. For further price details at anytime during the rental period please contact us on 1300 858 911 (purchases are subject to approval and some conditions apply).

Brand New Eizo CX271 27"
Add to Cart

So much to see. So simple to maintain.

The CX271 offers photographers and designers an abundant 3.7 megapixels across its 27-inch screen. It comes with EIZO’s ColorNavigator calibration software and a built-in SelfCorrection sensor that maintains calibration settings according to your schedule.

Built-in Correction Sensor Automatically Maintains Your Settings

timer

The CX271 is equipped with a built-in correction sensor housed within the front upper bezel. This sensor records your adjustment results, and maintains the white point and brightness values by automatically readjusting the settings at specific intervals that you determine. Even if the monitor is switched off or not connected to a computer, it will stick to its preset schedule and self correct.

Reproduces 99% of the Adobe RGB Color Space

An IPS panel with a wide color gamut reproduces 99% of the Adobe RGB color space so images shot in RAW can be converted to Adobe RGB or images shot in Adobe RGB will be displayed correctly. The colors seen in photos of vibrant blue skies and lush green forests will be reproduced faithfully. The wide color gamut also ensures that the monitor reproduces almost the entire ISO-coated and US web-coated CMYK color spaces used in printing as well as 93% of the DCI used in post production.

 

 

 

Excellent Tone Display in the Dark

Excellent tone display in darkWhen viewing the screen from an angle in a dimly lit room, dark tones typically appear washed out due to the display characteristics of LCD backlights. The monitor maintains a high contrast ratio even from an angle which allows the dark tones to retain their depth.

 

Non-Glare IPS Panel

The IPS (in-plane switching) panel exhibits no glare and allows several people to view the monitor with minimal color shift.

Non-glare IPS

LED Backlight Cuts Power by 40%power save

The LED backlight reduces energy consumption by 40% compared to a conventional backlight. It is also mercury-free for less impact on the environment when it is eventually disposed of.

Brightness Modulation Minimizes Flicker

To counteract the flicker that is noticeable by some users at low brightness settings, EIZO uses PWM (pulse width modulation) technology. This helps prevent eye fatigue for a more comfortable work environment.

Uniformity from Corner to Corner

uniformity
Delta-E ab distribution across the screen (gray level 128 measured)

Fluctuations in brightness and chromaticity on different parts of the screen are a common trait of LCD monitors. To counteract this, the monitor incorporates EIZO's patented digital uniformity equalizer (DUE) technology to ensure a Delta-E difference of 3 or less across the screen when the monitor leaves the factory. DUE also counterbalances the influences that a fluctuating ambient temperature may have on color temperature and brightness to ensure stable image display.

 

Individually Adjusted at the Factory

The gamma level for each ColorEdge monitor is adjusted at the factory. This is accomplished by measuring the R, G, and B gamma values from 0 – 255, then using the monitor’s 16-bit look-up table (LUT) to select the 256 most appropriate tones to achieve the desired value.

gamma.jpg
 

Stable Display within Seven Minutes of Startup

From the time it is turned on it typically takes 30 minutes or longer for a monitor’s brightness, chromaticity, and tone characteristics to stabilize. EIZO has shortened this warm-up time by more than 75% to a mere 7 minutes. For confirming your work in a photo studio or taking your monitor with you on location, you can get to work right away.

drift correction

10-Bit Simultaneous Display

Using the DisplayPort input, the monitor offers 10-bit simultaneous color display* from a 16-bit look-up table which means it can show more than one billion colors simultaneously. This is 64 times as many colors as you get with 8-bit display which results in even smoother color gradations and reduced Delta-E between two adjacent colors.
*A graphics board and software which support 10-bit output are also necessary for 10-bit display.

10-bit display

Automatic Readjustment of Color Mode Preset with Internal Sensor

With the built-in SelfCorrection sensor, you can maintain the monitor at one of the color mode presets without using any software. When the monitor is calibrated at the EIZO factory, the SelfCorrection sensor measure’s the LCD panel’s white point and stores it to the monitor. When readjusting, the monitor compares the stored value for white point against the current value and corrects any difference.

selfcorrection.jpg
Self-correct to a preset mode by pressing a button on the front of the monitor

IP conversion

I/P Conversion

The HDMI input supports I/P (interlace/progressive) conversion for converting the interlace signals from TV and video into progressive signals for flicker-free display.

ColorNavigator 6

The bundled ColorNavigator software makes calibration both simple and quick. Just input target values for brightness, white point, and gamma. The built-in sensor directly utilizes the monitor's look-up table and creates an ICC profile within minutes. You can always download the latest version of ColorNavigator for free here on eizo.com.
ColorNavigator

 

logo_ColorNavigatorNX.jpg
logo_ColorNavigatorNetwork.jpg

Unify Color, Centralize Quality Control Management

ColorNavigator NX and ColorNavigator Network allow a single administrator to automate the quality control process of ColorEdge monitors across an entire studio or between multiple locations.

With ColorNavigator NX installed on workstations, an administrator can use ColorNavigator Network software to schedule self-calibration, set the color modes, activate key lock to prevent unintended changes to color settings (CG series), register or adjust asset management settings, and import/export monitor settings.

Unify Color, Centralize Quality Control Management

Worry-Free Web Hosting

ColorNavigator Network is hosted by EIZO on a secure cloud server to free you from the initial investment and running costs of providing your own server.

Multiple Inputs

DisplayPort, HDMI, and DVI-D inputs are included and support resolutions up to 2560 x 1440. The HDMI input also offers direct connection with digital cameras. Two USB upstream ports allow two computers to be connected at once so it’s not necessary to reconnect the USB cable when using the ColorNavigator software and switching between the two computers.

connectors

Smooth Display of Video

For video editing or post production work, an overdrive circuit is included to reduce gray-to-gray response time to 6 ms and ensure that moving images look clean and sharp with a minimum of ghosting.

Adjustable Stand

Adjust the screen to the most comfortable angle for you and reposition it to show your work to a colleague or client. The monitor comes with a versatile stand that offers height, tilt, and swivel adjustments as well as portrait mode display.

adjustable stand