AquaTech P-Series 8-inch Dome Lens Port PD-85

AquaTech P-Series 8-inch Dome Lens Port PD-85

AquaTech P-Series 8-inch Dome Lens Port PD-85

This AquaTech P-Series 8-inch Dome Lens Port PD-85 is in excellent working condition, but shows some signs of general wear and tear. Original packaging included.

Loading product options

Compatible with AquaTech Delphin and Elite Housings

The AquaTech 6” Dome Lens Port PD-65 pairs perfectly with AquaTech Underwater Elite and Delphin Housings and is designed for use with fisheye lenses. It’s ideal for surface photography and shooting split shots (half in half out, above and below) with a super wide angle lens.

Threaded Mechanical Seal

The interchangeable port uses a threaded system to attach and mechanically seal – no additional tools are necessary.

Low Profile

Machined from an 9-inch hemisphere, the dome maintains a low profile for ease of use in the water.

Optically Correct Acrylic Front Element

Front element construction utilises an optically corrected acrylic element to preserve the image quality of your lens.

Scratch Resistant Coating

A scratch abrasive resistant coating is applied to the flat port’s front element to reduce risk of damage.

Lens Compatibility

The AquaTech P-Series PD65 Flat Port Extension is a 6-inch dome and supports the following lenses:

 

  • Canon 8-15 f/4 L (requires 30mm ext ring)
  • Canon 14mm f/2.8 (requires 30mm ext ring)
  • Canon 15mm f/2.8
  • Canon 16-35 f/2.8 (requires 70mm ext ring)
  • Canon 16-35 f/2.8 II (requires 70mm ext ring)
  • Canon 16-35 f/4 IS (requires 70mm ext ring)
  • Canon 17-40 f/4 (requires 70mm ext ring)
  • Canon 20 f/2.8
  • Nikon 14 f/2.8 (requires 30mm ext ring)
  • Nikon 14-24 f/2.8 (requires 30mm ext ring)
  • Nikon 16 f/2.8
  • Nikon 17-35 f/2.8 (requires 70mm ext ring)
  • Nikon 20 f/1.8 G ED
  • Nikon 20 f/2.8
  • Sony 10-18 F/4
  • Sony 16-35 f/4 ZA (requires 70mm ext ring)
  • Sigma 12-24 f4.5-5.6 (requires 30mm ext ring)
  • Tokina 10-17 f3.5-4.5
  • Tokina 11-16 f/2.8 (requires 30mm ext ring)
  • Rokinon 14mm T3.1 (requires 70mm ext ring)

 

 

  • Optically Correct Moulded Acrylic Dome Element
  • Machined from 8″ Hemisphere to Allow Low Profile Dome
  • Mechanically Sealed, No Adhesives Used
  • Dome Element Replaceable
Dimensions: 8″dome
Weight: 526g
Material: Acrylic dome element, Aluminum base