The Blackmagic Pocket Cinema Camera 4K / 6K Unified Accessory Kit (Pro) is a camera support package designed for the Blackmagic Pocket Cinema Camera 4K / 6K. The BMPCC4K / BMPCCC6K accessory package features our Unified BMPCC4K / BMPCC6K Camera Cage, a form fitting camera cage for secure camera accessory attachment, Unified DSLR 15mm Baseplate, a quick release baseplate that holds two 15mm Rod (15") at the correct lens height, Safety Dovetail (12") which interfaces with the ARRI dovetail slot on the bottom of the Unified Baseplate, A-Box (DSLR) for XLR audio inputs, Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3"), an articulating arm with multiple mounting points for accessories, and our Rod Clamp (15mm LW) which attaches the Battery Slide to the 15mm LW rods. The Battery Slide is an adjustable battery plate for attaching a V-Mount or Gold Mount plate to the camera.
Wooden Camera brand V-Mount plate utilising an IDX V-Mount and Blackmagic Pocket Cinema Camera 4K / 6K connector.
Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
Battery Slide is an adjustable mounting system for WC V-Mount, WC Gold Mount, QRC Gold Mount, and RED/Blueshape style battery plates. Rows of pass through holes allow attachment of Rod Clamps, cheeseplates, and more. Apply firm pressure to tilt the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode.
Unified BMPCC4K / BMPCC6K Camera Cage SSD Mount is a SSD mounting solution for our Unified BMPCC4K / BMPCC6K Camera Cage. The SSD mounting rail attaches to the vertical 15mm rod of the camera cage and includes a cable clamp and 2 inch 15mm rod. The SSD mounting plate is 4 x 2.75 inches and features several holes for mounting and rubber pads to prevent slipping. The SSD mounting plate attaches to the mounting rail via the 2 inch 15mm Rod, but can also be removed and mounted onto the vertical 15mm rod on the camera cage or any other 15mm rod. The SSD Mount also includes two 14 inch velcro straps for attaching various SSDs.
Weight: 2721.55 g (6 lbs)
Dimensions: 406.4 x 177.8 x 177.8 mm (16 x 7 x 7 in)
Weight: 187g (0.4 lbs)
Dimensions: 142.6 x 92.1 x 21.9 mm
Weight: 226.80g (0.5 lbs)
Dimensions: 152.4 x 114.3 x 45.7 mm (6.0 x 4.5 x 1.8 in)
Weight: 127g (0.28 lbs)
Dimensions: 120.7 x 101.6 x 69.9 mm (4.75 x 4 x 2.75 in)