PDMOVIE Remote Air Pro 3 Single Channel Wireless Follow Focus System
Loading product options
The PD Movie Remote Air Pro 3 Single-Channel Wireless Follow Focus System includes a single wireless receiving motor and a handwheel that integrates focus, zoom, and iris control, although controlling more than one channel requires additional motors. The handwheel has a wireless range of 100m and supports 19 wireless channels, allowing you to find the cleanest signal path even when using multiple motors in a FIZ (focus, iris, zoom) setup. An available iOS app allows you to control the system with your iOS device from up to 10m away.
The included receiver motor has a built-in wireless antenna and power port. This motor features a cine-style drive gear with 0.8 MOD and can drive either focus, iris, or zoom on a lens with cine-style gears. If you need to drive more than one lens ring, you will need an additional motor, but you can use one without the wireless receiver as you can daisy chain motors together. The calibration procedure has been simplified and you can calibrate lenses with or without hardstops. Built-in OLED screens on the motor and handwheel provide clear information on the state of your system.
| Number of Channels | 1 |
|---|---|
| Maximum Range | 328' / 99.97 m |
| Wireless Frequency | 2.4 GHz |
Remote Air App
The controller and Receiver motor have a built-in Bluetooth module. An iPhone IOS APP controls the lens, and lens data, and sets automated lens movements.
Handwheel
The controller features a 75mm diameter large follow handwheel, which is more effective when using the palm of your hand to pull focus. or when wearing gloves. With four 1/4" screw treads, it can be easily attached to the included handle or mounted on virtually any handle, motor, or arm.
The handwheel incorporates a focus controller, and a zoom rocker, allowing you to simultaneously control up to three axes with the proper number of motors. The focus controller features a built-in LED light and glow-in-dark marking disks that allow you to see your custom markings in low-light situations
The controller uses a replaceable 600mAh battery, supports a hot plug, and features a battery life of 12 hours.
The controller and receiver motor both use the same data display mode and the LED screens are placed so that the data can be easily read.
The Remote Air Pro 3 features an all-in-one multifunction button. It allows you to quickly set the signal channel, control channel, motor speed, and remote recording.
The handwheel controller is compatible with RED and ARRI as well as LANC control of your camera's run/stop.
The Remote Air Pro 3 includes a redesigned handle from previous versions. You can now mount and unmount the handwheel from the handle. The handle incorporates nine 1/4"-20 mounting holes that allow you to mount accessories such as a mobile device, monitor, wireless receiver, and lanyard. The handle is made of high-strength aluminium alloy and durable rubber.
If you want to operate the focus controller in wired mode, simply connect the 6-pin motor drive cable from the motor to the controller.
Motor Improvements
The new MOTOR AIR supports 7 to 20V input voltage, which means that it can now be used with a 7.2V power supply.
You can calibrate your lens manually or automatically, adjust the lens speed from slow to medium or fast, change the motor direction, cancel the calibration, and recover the calibration.
Privacy | Complaints | Website Terms & Conditions of Use | Designed by Datalive Software
© 2019 The Polygon Group Pty Ltd
Cameracorp Australia is a trading name of The Polygon Group Pty Ltd
ABN 98 066 641 325 | Australian Credit License No. 412456
