PDMOVIE Remote Air Pro 3 Triple Channel Wireless Follow Focus System
Loading product options
The PDMOVIE Remote Air Pro 3 Triple Channel Wireless Follow Focus System includes a wireless receiving motor, two slave motors for controlling a second and third lens functions, and a handwheel that integrates focus, zoom, and iris control. The handwheel has a wireless range of 328' and supports 19 wireless channels, allowing you to find the cleanest signal path even when using multiple motors in a FIZ (focus, iris, zoom) setup. An available iOS app allows you to control the system with your iOS device from up to 33' away. .
The included receiver motor connects to power and receives the wireless control signals. This motor features a cine-style drive gear with 0.8 MOD and can drive either focus, iris, or zoom on a lens with cine-style gears. It also provides power and control via included cables to the slave motors. The calibration procedure has been simplified and you can calibrate lenses with or without hardstops. Built-in OLED screens on the motors and handwheel provide clear information on the state of your system.
| Number of Channels | 3 |
|---|---|
| Maximum Range | 328' / 99.97 m |
| Wireless Frequency | 2.4 GHz |
The controller and receiver motor have a built-in Bluetooth module. An iPhone i0S APP controls the lens, lens data, and set automated lens movements.
The controller features a 75mm diameter large follow control handwheel, which is more effective when using the palm of your hand to pull focus, or when wearing gloves. With 1/4"-20 mounting holes, it can be easily attached to the included handle or mounted on virtually any handle, monitor, or arm.
The handwheel incorporates a focus controller, a zoom rocker, and an iris rocker, allowing you to simultaneously control up to three axes, with the proper number of motors. The focus controller features a built-in LED light and glow-in-the-dark marking disks that allow you to see your custom markings while in low-light situations.
The controller uses a replaceable 600mAh battery, supports hot plug, and features a battery life of 12 hours.
The controller and receiver motor both use the same data display mode, and the LED screens are placed so that the data can be easily read.
The Remote Air Pro 3 features an all-in-one multifunction button. It allows you to quickly set the signal channel, control channel, motor speed, and remote recording.
The handwheel controller is compatible with RED and ARRI as well as LANC control of your camera's run/stop
The Remote Air Pro 3 includes a redesigned handle from previous versions. You can now mount and unmount the handwheel from the handle. The handle incorporates nine 1/4"-20 mounting holes that allow you to mount accessories such as a mobile device, monitor, wireless receiver, and lanyard. The handle is made of high-strength aluminum alloy and durable rubber.
If you want to operate the focus controller in wired mode, simply connect the 6-pin motor drive cable from the motor to the controller.
The new MOTOR AIR supports 7 to 20V input voltage, which means that it can now be used with a 7.2V power supply.
You can calibrate your lens manually or automatically, adjust the lens spe
SThe PD-RX REMOTE AIR Receiver Motor features 0.5 Nm of torque. The PDMOVIE MX Motor features 0.8 Nm of torque. The PDMOVIE Motor Pro (the slave motor) features 1.2 Nm of torque, useful with stiff zoom lenses.
Privacy | Complaints | Website Terms & Conditions of Use | Designed by Datalive Software
© 2019 The Polygon Group Pty Ltd
Cameracorp Australia is a trading name of The Polygon Group Pty Ltd
ABN 98 066 641 325 | Australian Credit License No. 412456
