The latest member of the Jinbei TTL family, the HD400 provides a lightweight and portable flash with enough power for portraiture in any location and is FULLY FEATURED, not a cut down model. Including a Proportional LED modeling lamp.
Use as a single light, or combine with the Jinbei Mars3, the HD610, and the MSN TTL lights to make your own ideal flash kit, and use one trigger system to control them all.
The HD400 also includes a native inbuilt Canon RF receiver, so you can control the HD400 with a Canon RT speedlight!.
2.15 KG makes this 30% lighter than a HD610 or simular. It includes a newly designed HARD reflector that acts as a protection cap with magnetic filters in Red, Green Blue and Yellow. These filters can be used as holders for you own coloured gels.
|Guide Number||GN66 ( 2M, ISO100, Jinbei 55 degree reflector)
GN72 ( 2m, Jinbei 70 degree Wide-angle reflector)
|Flash Power Variation||1.0-9.0(M)/ 5.0-9.0 (HSS)/ +/-3.0EV(TTL)|
|Power Variation Mode||1 f-stop/ 0.1 f-stop increment|
|Flash Mode||M/ TTL|
|Sync Mode||NOR/ HSS/ Freeze|
|Flash Duration(t0.5)||1/800s-1/8500s(NOR), 1/800S-1/19000S (Freeze)|
|Color Temperature||NOR/ TTL/ HSS: 5500K+/- 150K, Freeze: 5500K+/-500K|
|Modeling Lamp||15W LED ( Proportion/ Independent/ Off)|
|Wireless Receiver||Built-in 2.4GHz, TR-Q6C/N/S/F (TR-V6/ TR-A6II/ TR-611/ TR-612)|
|Channel/ Group/ ID||CH:00-15/ GR: A-J / ID:00-99|
|Cell||Built-in infra-red sensor|
|Sync socket/ Sync voltage||3.5mm/ DC 5V|
|Battery Capacity||up to 400times at full power|
|Auto power off||after 60 minutes / sleep activated after 30 minutes|
|USB firmware update support||Yes|
|Operating room temperature||0-40 degrees|
|Dimension||280x125x190mm( LxWxH mm)|