The Pavotube has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting. Both 2-foot and 1.2 meters variants are available as single lights as well as kits of two lights and four lights.
An amazingly versatile studio lighting fixture that featuring 0-100% dimming, a max output of 2850 lumens, adjustable colour temperature from 6500-2700K as well as a full spectrum RGB and pre-programmed special lighting effects.
Easily achieve beautiful results without adding plastic filters or gels. The PavoTube Tubes' easy-to-use dials and buttons enable you to dial temperature from warm to cold (6500K-2700K) or hue and saturation in RGB mode.
Perfect for use in the studio or on location, PavoTube RGB+W Tubes can run off either the included AC adapter or their internal Li-ion batteries for up to 2 hours at full brightness when no mains power is available.
Simply connect multiple PavoTube RGB+W Tubes together via the included sync cord to build and shape a powerful bank of lights with synchronized adjustments and effects.
|Model||PavoTube 15C 2KIT|
|Dimensions||77 x 4.8 x 4.8 cm|
|Dimming||0 to 100 % continuous|
|Dimming||0 to 100 % continuous|
|Control||Dimming with NNRC1 Remote
Wifi App control with with LGA30 Wifi Router
Synchro control with included Pavotube Sync cables
Let your creativity run wild with these Nanlite PavoTube 15C RGBW 2ft (60cm) LED tube - 4KIT. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.
At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you're using, making it easy to fine-tune and then recreate them in the future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing setup without needing a lot of extra preparation.
This light's master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects. Perfect for use in the studio or on location, this lightweight tube is available in 0.62m and 1.2m lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter and also has two built-in 2200mAH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.