Rode Wireless PRO

Rode Wireless PRO

Rode Wireless PRO

Loading product options

The Rode Wireless Pro is a setup that allows you to capture audio without the need for physical cables between the microphone and the recording device (such as a camera or audio recorder). It typically consists of two main components: a wireless microphone transmitter and a wireless receiver.


Key Features of the Rode Wireless Pro

  • State-of-the-art Wireless Audio
  • Never Lose a Recording
  • Audio and Video, Perfectly in Sync
  • Pristine Audio in Any Situation


State-of-the-art Wireless Audio

RØDE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There’s nothing worse than pulling your audio into your editing software and realising your recording clipped and can’t be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO’s advanced timecode capability, you can perfectly synchronise your audio and video with ease – no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.


  • GTIN - 698813010943
Acoustic Principle Pre-polarised pressure transducer
Polar Pattern Omnidirectional
Frequency Range 20 Hz – 20 kHz
Maximum SPL 123.5 dB SPL
Equivalent Noise (A-Weighted) 22 dBA
Signal-to-noise Ratio 72 dB
Analog Inputs 3.5mm locking TRS (TX)
Analog Outputs 3.5m TRRS (RX)
Transmission Range 260m (line of sight)
Digital Connectivity USB-C
Operating System Requirements macOS 10.15 above
Power Requirements In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time Up to 7 hours