Tascam CA-XLR2d XLR Microphone Adapter Canon Kit
Loading product options
Capture high-quality, low-noise recordings from your favorite XLR microphone directly to your Canon camera with the Tascam CA-XLR2d XLR Microphone Adapter Canon Kit. This version includes an accessory shoe that takes advantage of Canon's multi-accessory shoe to provide a cable-free digital audio connection to the camera—avoiding any deterioration in sound quality and eliminating the work of synchronizing images and sound in postproduction.
The accessory shoe also allows the camera to supply the adapter with power for the analog-to-digital converter and the 48V phantom power needed for condenser microphones. Two AA batteries will also power the unit, and the 3.5mm output jack will connect to just about any camera's 3.5mm audio input, using the supplied cable; meaning the CA-XLR2d-C can work as an analog audio adapter with a wide variety of mirrorless/DSLR cameras. The audio output can also serve as a headphone jack for real-time monitoring in the field.
Choose the appropriate microphone or input that matches your application. From a single shotgun mic for interviews or dialog to dual dynamic or condenser mics for stereo imaging or the entire audio mix fed from the master mixer, using the line-level capability, the CA-XLR2d-C supports a wide variety of shooting applications.
The CA-XLR2d-C is equipped with a high-definition discrete-architecture microphone preamplifier that can process anything from room tone to explosions, making it well suited to a wide range of sets and environments. Each input supports microphone/line-level switching and a +48V phantom power supply. The CA-XLR2d-C allows input of dynamic microphones, condenser microphones, and line-level audio signals from a mixer.
A cold shoe on the top panel expands setting flexibility. The shockmount mechanism is vibration and noise resistant and allows you to connect various microphones. With two combo XLR-1/4" input connectors and one 3.5mm stereo mini microphone input jack, the CA-XLR2d-C has the flexibility to adapt to the gear necessary for the job and work in a wide variety of shooting scenarios. A 3.5mm output terminal with headphone mode provides latency-free direct monitoring or analog camera connection.
Internal processing options such as Auto Level, a Low-Cut Filter, and a Limiter are on board, all using convenient switches. The 1+2 LINK function allows you to adjust the L/R volume simultaneously when recording in stereo. The unit supports 16/24-bit rates and 48/96 kHz sampling rates.
TASCAM has collaborated with Canon to create an in-camera recording solution for XLR mics using the multi-accessory shoe connection. This provides a cable-free digital audio transmission directly into the camera along with a buss power supply from the camera to create an efficient and highly mobile solution.
For analog setups, use the included 2 x AA battery box, cold shoe mount, and adapter cable, which connects the CA-XLR2d's 3.5mm output to a camera's 3.5mm mic input jack. This allows the CA-XLR2d-C to work as an analog audio adapter and deliver high-quality sound from XLR mics to a wide range of existing camera users.
Canon cameras: EOS R3, EOS R5 C, EOS R7, and XF605 are supported with powering from the camera. For the EOS R10, the audio connection is supported, but from-camera powering is not.
| Number of Channels | 2 |
|---|---|
| Analog to Digital Converter | Bit Rate: 16/24 Sampling Frequency: 48/96 kHz (with Compatible Cameras via Adapter) |
| Balanced Inputs | Microphone Inputs Input Switch to MIC Input Impedance: ≥ 2 Kilohms Maximum Input Level: +6 dBu (Att Setting at 46 dB) Minimum Input Level: -60 dBu (Att Setting at 0 dB) Gain Range: 66 dB Line Inputs Input Switch to LINE Input Impedance: ≥ 10 Kilohms Maximum Input Level: +24 dBu (Att Setting at 46 dB) Minimum Input Level: +4 dBu (Att Setting at 0 dB) Gain Range: 66 dB |
| Unbalanced Input | Connector: 3.5 mm Stereo Input Jack Input Impedance: ≥ 2 Kilohms Maximum Input Level: +6 dBu (Att Setting at 46 dB) Minimum Input Level: -60 dBu (Att Setting at 0 dB) Gain Range: 66 dB Plug-In Power: 2.7 V |
| Unbalanced Output | Connector: 3.5 mm Stereo Input Jack Output Level: 0.29 Vrms (Fixed, Output Setting on Camera), 0.5 Vrms (Output Volume Setting at Max, Output Setting on Headphones) Headphone Working Impedance: 16 to 250 Ohms |
| Power Consumption | 2 W Maximum |
| Dimensions | 3.47 x 4.69 x 4.33" / 88.2 x 119.1 x 110 mm (Not Including Protrusions) |
| Weight | 12.6 oz / 357 g (with Battery Holder Attached, Not Including Batteries) |
Privacy | Complaints | Website Terms & Conditions of Use | Designed by Datalive Software
© 2019 The Polygon Group Pty Ltd
Cameracorp Australia is a trading name of The Polygon Group Pty Ltd
ABN 98 066 641 325 | Australian Credit License No. 412456
