|Camera Plate Features||Sliding Balance Plate|
|Camera Mounting Screw||1/4"-20 Male
The Benro A2573F Aluminum Single Tube Tripod with S4Pro Fluid Video Head supports up to 8.8 lb loads and can be carried around fairly easily thanks to its compact and lightweight design. Moreover, with the head featuring a 60mm flat base and 3/8"-16 threaded hole, it can be removed from the tripod and efficiently mounted directly on sliders, jibs, and other support gear. Overall, you get a versatile system with single-tube legs that fold up neatly.
The S4Pro head is natively set at 1 step of counterbalance. At the push of a button on the side of the head, an additional step is added to a total of 2 steps. Next to that button is a release switch that takes you back to 1 step. There is no zero setting. The head features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90/-75°, and the pan range is a full 360°.
Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.
The A2573F is a 2-stage/3-section tripod featuring a flat base center column. With the head attached, the tripod reaches a maximum height of 70" with the column fully extended. With the column retracted, it stands at approximately 63" maximum. The minimum height is 41 cm, which is an advantageous low height that isn't common among most tripods. At this height, you can set up the tripod for low angle shots in time-lapse and other applications. Each leg of the tripod is independently adjustable into three positions. Being able to snap the legs into one of these three positions will let you set up quickly and efficiently. Making things even more efficient, the center column has a leveling adapter so that you can adjust the position of the fluid head without having to adjust the tripod legs. The center column also has a weight hook for sandbags and other loads you can hang off of it for additional stability. The A2573F tripod features rubber and spiked feet for use on virtually all types of surfaces.
Benro A2573F Aluminum Single Tube Tripod with S4Pro Fluid Video Head
4 kg Payload
1-2 Steps Counterbalance
60mm Flat Base with 3/8"-16 Thread
Low-Angle 41 to 177 cm Height (2 Stages)
Three Leg Positions
S4Pro Fluid Head
4 kg payload
60mm flat base with a 3/8"-16 thread
Compatible with 60mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
1-2 steps of counterbalance
Fixed pan and tilt drag
Independent pan and tilt locks
+90/-75° tilt range
360° pan range
Made of magnesium and aluminum
Rosette adapters on the left and right side for attaching the included pan bar
Sliding camera plate with safety lock
1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
Two 1/4"-20 threaded holes for accessories
Maximum height of 177 cm with the S4Pro attached and center column extended
Low-angle minimum height of 41 cm
Single-tube legs independently adjustable into three positions
Leveling adapter on the end of the center column
Spiked and rubber feet
Flip leg locks