DJI Ronin MX

DJI Ronin MX

DJI Ronin MX

4 ⭐⭐⭐⭐ This DJI Ronin MX is in great physical and working condition and shows only minimal general wear attributable to prior use. Included is x1 camera plate, 1x TRX handheld transmitter, 2x batteries, 1x charger and AC cable, 1x ground stand, 1x screw pack, 1x tuning stand, 2x USB Micro cables and the original packaging.

Loading product options

The Ronin-MX is DJI’s first gimbal designed for use on the ground and in the air. With a newly designed two-point cage, the system is capable of continuous 360° rotation and its overall stability and rigidity is enhanced. Use almost any camera, from the GH4 to the RED Epic, and mount it to the DJI M600 to start capturing aerials in minutes.



Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Aerial Mode
-Jib or Wirecam Mode

Built-in, independent IMU module

DJI Specialized Gimbal Drive Motors with Encoders

Bluetooth Module

USB Connection

2.4GHz Receiver

Temperature Sensor

DJI Advanced 32-Bit DSP Processor

D-Bus Receiver Supported

Mechanical & Electrical Characteristics

Working Current Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time 3 hours


5° F ~ 120° F (-15° C ~ 50° C)
Weight Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)


Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm
Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power 4S Ronin-M Battery
Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements iOS 7.1 or above; Android 4.3 or above

Working Performance

Load Weight (Reference Value) 10 lb (4.5 kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°