Edelkrone HeadPLUS PRO Pan and Tilt Head

Edelkrone HeadPLUS PRO Pan and Tilt Head

Edelkrone HeadPLUS PRO Pan and Tilt Head

Loading product options

Upgrade your shots with smooth, precise motion using the edelkrone HeadPLUS PRO Pan and Tilt Head. The sturdy aluminium and steelhead support a maximum equipment load of 9.1 kgs. It can be mounted onto a tripod with a 3/8"-16 screw or used with the SliderPLUS PRO with Slide Module for smooth pan/tilt-sliding shots.

The head can be precisely controlled via the edelkrone smartphone app or it can be moved manually. When mounted on the SliderPLUS PRO, you can track objects automatically to produce dramatic motion shots such as parallax effects. The head can also be programmed for time-lapse or special effects shots by recording motions and repeating them.

With the separately available Focus Module, you can control focus at points during your motion. During a pan-and-tilt sliding shot, you can pre-program to live-switch between three targets and adjust focus during movement. You can also purchase the Laser Module which can record the distance and location of your subject, allowing you to track the object while in motion. The head also has a LANC port which allows you to trigger your camera's shutter with a separately available cable.

The head folds flat, making it easy to store in a production bag. The HeadPLUS PRO also includes an L-bracket with 1/4"-20 mounting screw for your camera, a LINK cable, and width extenders for use with the SliderPLUS PRO legs. You can power the unit with a separately available AC adapter or optional V-mount, Gold mount, LP-E6, or NP-F battery plates.

Sturdy Aluminum Design

The HeadPLUS PRO is made with CNC-machined aluminium and can hold an equipment load of up to 20 lb. It weighs under 8 lb and folds to fit in a bag. It comes with an L-bracket with a 1/4"-20 screw for mounting your camera.

Easy Manual or Auto Operation

The head requires no calibration and operates smoothly and silently. You can either program it for automated motion or operate it manually.

Mounting and Compatibility

The HeadPLUS PRO can be installed on a tripod with a 3/8"-16 mount, or used with the SliderPLUS PRO with Slide Module for sliding shots. It can also be used with the SliderONE PRO, DollyPLUS, and previous generation SliderPLUS and SliderPLUS PRO.

Smartphone App Control

Connect the edelkrone smartphone app via Bluetooth to control speed and record/repeat motions for time-lapses, visual effects, or other complex shots.

Target Switching

With the optional Focus Module, you can set up to three targets for smooth transitions and keep them each in sharp focus during live motion.

Object Tracking

You can purchase the optional Laser Module to pinpoint your subject, learn its distance, and track it when performing complex pan-and-tilt sliding shots.

Power

Power with a separately available AC adapter or optional V-mount, Gold mount, LP-E6, or NP-F battery plates. It operates for approximately four hours and shoots 28,800 photos in time-lapse mode on 28.8Wh batteries.

Material of Construction CNC-Machined Aluminum and Stainless Steel
Load Capacity 9.1 kg
Mounting Options HeadPLUS: 3/8"-16 Thread on Bottom
L-Bracket: 1/4"-20 Screw
Motor Type Step Motors with Ultra High-Resolution Encoders x2
Number of Axes 2, Pan and Tilt
Maximum Speed 360° in 20 Seconds
Wireless Support Bluetooth
App Compatibility iOS 11.0 or Later
Android 5.0 or Later
Power Voltage Input: 100-240 V
Voltage Output: 9.0 V
Current Output: 2.2 A
Polarization: Positive Center
AC Adapter: Optional 2.1 mm Barrel Plug Output Connector
Battery Plates: Optional Gold Mount, V-Mount, LP-E6, NP-F
Battery Life: 4 Hours Continuous with 28.8 Wh Battery Max
Time-Lapse Mode: 28,800 Photos on Full Charge
Control Ports LINK Port: LINK, for Connection to Slide Module
Focus Port: LINK, for Focus Module
Laser Port: LINK, for Laser Module
Shutter Control: 2.5 mm LANC
Dimensions HeadPLUS PRO: 43.2 x 10.3 x 7.8 cm
L-Bracket: 17.4 x 15 x 8 cm (Folded)
Weight HeadPLUS PRO: 3.6 kg
L-Bracket: 0.45kg
  • Controlled from a smartphone via Bluetooth
  • Can be easily programmed for motion timelapses
  • Can pair and work with Slide Module or SliderONE PRO
  • Can automatically track stationary objects.
  • Can track focus on stationary objects (add focus module)
  • Can learn target positions automatically (add laser module)
  • Can be powered via LPE6, NP-F, Gold Mount, V-Mount Batteries
  • Can also be powered via AC-DC adapter
  • Ultra silent operation
  • Ultra precise backlash-free operation
  • Allows manual panning and tilting without affecting the motors.
  • Unfolds to fit in a back-pack.
  • 100% CNC machined aluminum body