The Rode VideoMic with the unique Rycote Lyre Suspension System is a shotgun microphone that can easily be mounted on your Digital SLR camera as long as there is a mic input.
It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight, and when mounting on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its super-cardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
An attached, coiled cable terminates to a 3.5mm mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt battery (sold separately). The microphone will run for approximately 100 hours on a single battery.
- Directional Video Condenser Microphone.
- Rycote Suspension System
- Mounts to Standard Camera Shoe.
- 3.5mm Mini Jack Plug
- Studio-Quality Sound
- 9V Battery Powered
Selectable 10 or 20dB Pad
When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20dB pad lessens the microphone's sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.
Barrel Canceling Pick Up
The Rode Video Mic functions as a true line plus gradient microphone with a super-cardioid pattern in the front and a barrel that cancels side-audio. The result is maximum pick up of the source in highly ambient and noisy environments.
High Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.
The condenser element is powered with a standard 9-volt battery for up to 100 hours (approximately).