|Flash modes||M, TTL|
|Synchronization modes||Normal, HSS, synchronization to the 1st shutter curtain
Synchronization to the 2nd shutter curtain
|Power regulation||M / HSS: 1.0 - 9.0 1/256 - 1/1 / TTL: 3.0 EV EV|
|Full power recycling time||0.05-1.2s|
|The integrated hot shoe is compatible with||Canon, Nikon, And Fuji. With an adaptor is also compatible with Sony
2.8" Touch Screen
|Channels||31 01 - 311|
|Radio receiver||Integrated, 2.4 GHz|
|Battery operation||Lithium polymer battery 11.1 V DC 10 A / 11.1 Wh / 1000 mAh
Input max. 1.5 A, 12.6 V
Battery life: 300 charge cycles up to 80 capacity
|Charger||Input: 100 - 240 V 0.5 A, 50/60 Hz
Output: 12.6 V DC 1 A / 12.6 W
|Trips in battery mode||350|
|Further equipment||Electric zoom head 0 - 5 / AO 28 - 105 mm / Canon RT mode on / off ID: 00 - 99 99)
Sleep mode automatic shutdown: 15 min 20 min / 20 min 40 min0 Min)
Support SYNC-X / firmware upgrade/factory reset
LCD touch screen /
Trigger function to control other Jinbei flashes
Flash head can be tilted by over 90 and rotated by almost 180ar
|Compatible radio remote controls||Jinbei TR-Q7, TR-Q6|
|The Jinbei HD2 PRO TTL On-Camera Flash with RT Control is a powerful light solution for when you need an on-camera-flash for your camera on the go. The flash has one lithium polymer battery with a capacity of 1000 mAh and thus achieves a power of 80 Ws which is adjustable in 9 f-stops.
With a single battery charge, you can reach over 350 releases so that you have enough power on the go to illuminate your subjects exactly how you want them. The flash is compatible with Canon, Sony, Nikon, Fuji, Panasonic, Olympus cameras as well as with the wireless transmitters TR-Q7 and TR-Q6Sony, it is compatible with a separately available adapter. And of course, this is also possible in very quick sequences, because the Recycling time of lightning is only 1.2 seconds. But also the burn-off time of the attachment flash is impressive because it is up to1 / 10,000 s
The HD-2 Pro does not have to be used as an on-camera-flash, but can also be positioned independently of the camera for more targeted lighting. This is a lightning stand with a ¼ thread included. The flash is then controlled by a separate Jinbei radio transmitter.
With all these functions that this flash brings with it, it is still extremely compact and weighs only 450 grams without the battery. So you can easily take it with you anywhere without having to carry heavy luggage with you.
Note: Shown in use for illustration only, additional equipment not included.
With TTL you can enjoy convenient automatic functions that change with changing light conditions during outdoor shoots prove to be very advantageous, as they save you the constant manual correction of the flash output on the device.
High-speed synchronization HSS (only in manual mode enables faster shutter speeds than the usual flash sync times. Depending on the camera model, this can be up to 1/8500 second. With extremely short exposure times you can freeze fast movements, flash against the sun and use a more open aperture portrait outdoors.
In the synchronization to the first shutter, the flash is triggered at the beginning with a short sync time and then the ambient light is used to display the movement
In the synchronization to the second shutter will lightning at the end of the Shutter speed is triggered with a short burn-out time after the motion is captured via the ambient light sometimes, of course, you need different settings for different shoots. And you can easily do that on touch display set the flash. You can change your flash settings in 31 channels and 6 groups organize. The touch display is an absolute novelty for clip-on flashes. With the large overview of the displays, This also results in a particularly simple operation.